Version 3.0.6 Beta 3 Release

[Stuart]

The latest beta of iSMARTtrain V3.0 is available for download from http://www.ismarttrain.com/Beta/

This release introduces support for the Polar FlowLink interface. Only the Polar RS300x is supported in this release. Other devices will be added as development progresses.

As always, any problems/questions, etc., please post here.

Regards

Stuart
OTAG Technologies Ltd

[jluis1964]

import sessions - Suunto sdf files does not recognize distance, zones

[Stuart]

import sessions - Suunto sdf files does not recognize distance, zones

What Suunto model are the .sdf files from, and did this work correctly in V3.0.5?

Thanks

Stuart
OTAG Technologies Ltd

[jluis1964]

Files are from exported from Suunto Training Manager Lite to SDF files and imported in iSmarttrain. I use a t3c polished and not tried in 3.0.5! e.g.
[HEADER]
FILEVERSION=1
TYPE=0
SOURCE=File
NAME=Barreiros
DISTANCE=9280
AVGSPEED=3.42435424354244
MAXSPEED=4.10546875
AVGCADENCE=0
DURATION=2710
MAXHR=155
MINHR=0
AVGHR=130
STARTTIME=01.06.2009 12:53.00
TOTENERGYCONSUMPTION=422
HRABOVETIME=360
HRBELOWTIME=120
HRINTIME=2220
PERSONAL_RESTINGHR=0
PERSONAL_ACTIVITYCLASS=8.5
PEAKEPOC=81
HRLIMITHIGH=146
HRLIMITLOW=109
FEELING=5
MOD_WEIGHT=64
BIKEDISTANCE=0
FOOTDISTANCE=9280
GPSDISTANCE=0
TRAININGEFFECT=3
ISTESTLOG=0
HRZONE1LIMIT=60
HRZONE2LIMIT=70
HRZONE3LIMIT=80
HRZONEABOVELIMIT=90
HRZONE0TIME=120
HRZONE1TIME=1260
HRZONE2TIME=1020
HRZONE3TIME=300
HRZONE4TIME=0
[POINTS]
"T3LAP",01.06.2009,13:38.10,2710,"",2710,9280,130,3.42578125

[Rusty Smith]

Hi Stuart - I have downloaded the Version 3.0.6 Beta 3 Release and tried to download from my CS200 via sonic link. I cannot seem to get it to work, no matter what settings I use. If I set the gain really high, I get some movement from the activity bars but the download still fails. If I set the gain back to where I usually have it (65~75) it usually shows no activity at all. I switched back to 3.0.5 and it works as it should.

[Stuart]

Hi Stuart - I have downloaded the Version 3.0.6 Beta 3 Release and tried to download from my CS200 via sonic link. I cannot seem to get it to work, no matter what settings I use. If I set the gain really high, I get some movement from the activity bars but the download still fails. If I set the gain back to where I usually have it (65~75) it usually shows no activity at all. I switched back to 3.0.5 and it works as it should.

Hi Rusty,
Yes, sorry, that's a know problem with the V3.0.6 betas - should have put it in the release notes. Obviously, it'll be fixed before the final release.

Regards

Stuart
OTAG Technologies Ltd

[Stuart]

Files are from exported from Suunto Training Manager Lite to SDF files and imported in iSmarttrain. I use a t3c polished and not tried in 3.0.5! e.g.

We've only used .sdf files from the T6 so far - if you can send me a few sample .sdfs from the T3c, I'll have a look at adding this feature.

Thanks

Stuart
OTAG Technologies Ltd

[lstelie]

Hello Stuart

I hoped that this beta release would propose the experimental Belkin IR support for RS800 but i fail to find it,

Luc

[Stuart]

Hello Stuart

I hoped that this beta release would propose the experimental Belkin IR support for RS800 but i fail to find it,

Luc

Hi Luc,
No, not yet - we still haven't finished decoding the RS800 data format.

Regards

Stuart

[Stuart]

Hello Stuart

I hoped that this beta release would propose the experimental Belkin IR support for RS800 but i fail to find it,

Luc

Try Beta 4, not official support, but it's there - http://tinyurl.com/mpv8n4

Regards

Stuart