iSMARTtrain V3.0.6 Beta 8 Release

[Stuart]

Hi Stuart,

Thanks for the response, console shows the following errors:

29/09/2009 07:47:29 iSMARTtrain[11191] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
29/09/2009 07:47:29 iSMARTtrain[11191] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
29/09/2009 07:47:29 iSMARTtrain[11191] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
29/09/2009 07:47:29 iSMARTtrain[11191] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
29/09/2009 07:47:29 iSMARTtrain[11191] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
29/09/2009 07:47:29 iSMARTtrain[11191] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
29/09/2009 07:47:29 iSMARTtrain[11191] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
29/09/2009 07:47:29 iSMARTtrain[11191] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
29/09/2009 07:47:29 iSMARTtrain[11191] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
29/09/2009 07:47:49 iSMARTtrain[11191] *** attempt to pop an unknown autorelease pool (0x1ab0e00)
29/09/2009 07:48:19 iSMARTtrain[11191] *** attempt to pop an unknown autorelease pool (0x1ab0e00)

Does this help at all?

No, these are from iSMARTtrain (it shouldn't show errors, but thats another story). The messages will be from the system when the PC Pod is plugged in - it'll happen regardless of whether or not iSMARTtrain is running.

Regards

Stuart

[rassilon7]

Ha!

Try this instead:

Sep 29 21:07:57 Omars-MBP pcscd[1859]: Non-smartcard device launched pcscd [Vendor: 0X10C4, Product: 0X80F6]

This seem to trigger in the system console when I plugged in.

Steve

[Stuart]

Ha!

Try this instead:

Sep 29 21:07:57 Omars-MBP pcscd[1859]: Non-smartcard device launched pcscd [Vendor: 0X10C4, Product: 0X80F6]

This seem to trigger in the system console when I plugged in.

Steve

Hmmm... that's the correct Vendor and Product IDs for the PC Pod - let me have a look on my Snow Leopard machine to see if I get any similar messages.

Thanks & Regards

Stuart
OTAG Technologies Ltd

[Stuart]

Ha!

Try this instead:

Sep 29 21:07:57 Omars-MBP pcscd[1859]: Non-smartcard device launched pcscd [Vendor: 0X10C4, Product: 0X80F6]

This seem to trigger in the system console when I plugged in.

Steve

Looks like that's a driver for Smartcard readers - are you using one on your system?

Thanks & Regards

Stuart
OTAG Technologies Ltd

[svendavid]

Hi,

I run the beta 8 version and while trying to connect a t3c to the my macbook (snow leopard) the watch says "no pc conn". Are there any further settings that need to be done? I ports mine does not show the SLAB_USBtoUART.kext as I've read and understood that it perhaps should, but instead it shows an iphone connection?! I might have given away at this point that this is over my level of computer knowledge...

[Stuart]

Hi,

I run the beta 8 version and while trying to connect a t3c to the my macbook (snow leopard) the watch says "no pc conn". Are there any further settings that need to be done? I ports mine does not show the SLAB_USBtoUART.kext as I've read and understood that it perhaps should, but instead it shows an iphone connection?! I might have given away at this point that this is over my level of computer knowledge...

Does the iPhone connection only show up when the PC Pod is plugged in?

Regards

Stuart

[svendavid]

No, the iphone connection seems to be there even when the pc pod is not connected. Still experiencing the same thing on beta 13.

[jaimieblagg]

Hi Stuart,

I am getting the following console error messages once I plug in my suunto PC POD? Any clues I have tried to change the plist file as someone has suggested but keep getting a authentication error when I save it?

Apr 20 21:40:02 jbmac /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[114]: No valid tickets, timing out
Apr 20 21:40:05 jbmac com.apple.kextd[9]: Can't read info dictionary for SLAB_USBtoUART.kext: IOCFUnserialize: syntax error near line 3.
Apr 20 21:40:25 jbmac pcscd[194]: Non-smartcard device launched pcscd [Vendor: 0X10C4, Product: 0X80F6]
Apr 20 21:42:27 jbmac pcscd[213]: Non-smartcard device launched pcscd [Vendor: 0X10C4, Product: 0X80F6]

thanks jaimie