iSMARTtrain V3.0.6 Beta 8 Release

[Stuart]

The latest beta of iSMARTtrain V3.0 is available for download from http://www.ismarttrain.com/Beta/

Most of the changes to this release relate to the Suunto T3, T4 & T6 devices. The code for downloading from these devices has been completely re-written which should eliminate most of the crashes that have been occurring.

As usual, post any problems here.

Regards

Stuart
OTAG Technologies Ltd

[Raynay]

Dear Stuart,

After a fresh install with no sample data I get the following error when importing an entry via the import (not download) functionality. I have tried to import 1 entry because downloading from the watch gives the same error as in Beta 7. (The SDF file is in your mailbox.)

--
-- User Comments:
--


--
-- User Email:
--


--
-- Stack Trace:
--
NilObjectException:
HRMFunctions:ImportSDFFile
HRMFunctions:GetHRMFilestoImport
Wnd_SessionMain:ImportFile
Wnd_SessionMain:kMenuImportImportFile

--
-- Environment:
--
OS: Mac OS X
OS Version: Mac OS X 10.6.1
Physical RAM: 2048MB
Logical RAM: 2048MB



Good luck.

Regards,
-Rene

[Stuart]

Dear Stuart,

After a fresh install with no sample data I get the following error when importing an entry via the import (not download) functionality. I have tried to import 1 entry because downloading from the watch gives the same error as in Beta 7. (The SDF file is in your mailbox.)

Good luck.

Regards,
-Rene

Hi Rene,
I've got your file and it imports perfectly here - I suspect it might be an issue with the international settings (i.e. date format, etc.). What do you have you International Settings on you Mac set to?

Thanks & Regards

Stuart
OTAG Technologies Ltd

[Raynay]

Region: Netherlands (English)
Calendar: Gregorian
FDoW: Monday

full: Monday, January 5, 2009
long: January 5, 2009
medium: Jan 5, 2009
short: 1/5/09

12:34 AM 4:56 pm

Euro
Units: Metric

[Stuart]

Region: Netherlands (English)
Calendar: Gregorian
FDoW: Monday

full: Monday, January 5, 2009
long: January 5, 2009
medium: Jan 5, 2009
short: 1/5/09

12:34 AM 4:56 pm

Euro
Units: Metric

Thanks, Rene,
I'll have a look at this.

Thanks & Regards

Stuart
OTAG Technologies Ltd

[rassilon7]

Hi,

I must be missing something because I am having no luck in getting my Suunto PC pod to connect ismarttrain and my T3C. I installed the driver but when I look under devices I only see USB options for Garmin products.

Any help would be gratefully received.

I am using Snow Leopard on a MacBook Pro and plugging directly into the in built USB port.

Regards

Steve

[Stuart]

Hi,

I must be missing something because I am having no luck in getting my Suunto PC pod to connect ismarttrain and my T3C. I installed the driver but when I look under devices I only see USB options for Garmin products.

Any help would be gratefully received.

I am using Snow Leopard on a MacBook Pro and plugging directly into the in built USB port.

Regards

Steve

Hi,
The PC Pod will show up in the Ports menu as a separate device - see below:

Picture 15.png

Thanks & Regards

Stuart
OTAG Technologies Ltd

[rassilon7]

In the port menu I only have Garmin and Sonic link listed the other 2 drivers are not listed. I have looked in my /system/library/extension folder and the "SLAB_USBtoUART.kext" is present, is there anything else that should be there? I have tried installing the drivers twice. Should any files be present in Library/extensions/ as well?

Thanks for your help

Steve

[Stuart]

In the port menu I only have Garmin and Sonic link listed the other 2 drivers are not listed. I have looked in my /system/library/extension folder and the "SLAB_USBtoUART.kext" is present, is there anything else that should be there? I have tried installing the drivers twice. Should any files be present in Library/extensions/ as well?

Thanks for your help

Steve

Hi Steve,
Sounds like the driver is installed correctly - do you see anything in the system logs when you plug the pod in, like any error messages, etc?

Thanks & Regards

Stuart
OTAG Technologies Ltd

[rassilon7]

Hi Stuart,

Thanks for the response, console shows the following errors:

29/09/2009 07:47:29 iSMARTtrain[11191] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
29/09/2009 07:47:29 iSMARTtrain[11191] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
29/09/2009 07:47:29 iSMARTtrain[11191] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
29/09/2009 07:47:29 iSMARTtrain[11191] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
29/09/2009 07:47:29 iSMARTtrain[11191] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
29/09/2009 07:47:29 iSMARTtrain[11191] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
29/09/2009 07:47:29 iSMARTtrain[11191] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
29/09/2009 07:47:29 iSMARTtrain[11191] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
29/09/2009 07:47:29 iSMARTtrain[11191] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
29/09/2009 07:47:49 iSMARTtrain[11191] *** attempt to pop an unknown autorelease pool (0x1ab0e00)
29/09/2009 07:48:19 iSMARTtrain[11191] *** attempt to pop an unknown autorelease pool (0x1ab0e00)

Does this help at all?