The latest beta of iSMARTtrain V3.0 is available for download from http://www.ismarttrain.com/Beta/
Most of the changes to this release relate to the Suunto T3, T4 & T6 devices. One major change is that downloading form T3 & T4 devices actually works now!
See our blog for more details - http://www.ismarttrain.com/blog/
Regards
Stuart
OTAG Technologies Ltd
iSMARTtrain V3.0.6 Beta 7 Release
Re: iSMARTtrain V3.0.6 Beta 7 Release
Stuart:
Great update.
I just try this beta with my Sunnto t3c and the connection works fast, show all the files and the general information was imported (date, time, duration, Av/Max HR, Cal, and in those sessions I use the GPS Pod the speed and the distance too).
However, the data graph (HR data) and the Time in Zones were missing (no data).
Jose
P.D. I like the new blog by the way.
Great update.
I just try this beta with my Sunnto t3c and the connection works fast, show all the files and the general information was imported (date, time, duration, Av/Max HR, Cal, and in those sessions I use the GPS Pod the speed and the distance too).
However, the data graph (HR data) and the Time in Zones were missing (no data).
Jose
P.D. I like the new blog by the way.
Re: iSMARTtrain V3.0.6 Beta 7 Release
jcueto wrote:Stuart:
Great update.
I just try this beta with my Sunnto t3c and the connection works fast, show all the files and the general information was imported (date, time, duration, Av/Max HR, Cal, and in those sessions I use the GPS Pod the speed and the distance too).
However, the data graph (HR data) and the Time in Zones were missing (no data).
Jose
P.D. I like the new blog by the way.
Time in zones will come - I just wanted to get this release out to make sure it worked for someone other than just me!
You won't get a HR Graph, as the T3 & T4 only store the time in zones, not that actual HR data.
Thanks & Regards
Stuart
OTAG Technologies Ltd
Re: iSMARTtrain V3.0.6 Beta 7 Release
The time in zones will be great, I just forget the t3c do not stores the full hr info.
Regards
Jose
Regards
Jose
Re: iSMARTtrain V3.0.6 Beta 7 Release
Hey Stuart,
Could you help me? I connect the T6 on my mac. Then I choose the T6. When I try to download the datas, the programme is crashing.
Then I get the following message.
Date/Time: 2009-09-14 19:41:44.934 +0200
OS Version: 10.4.11 (Build 8S165)
Report Version: 4
Command: iSMARTtrain
Path: /Users/marco/Desktop/iSMARTtrain.app/Contents/MacOS/iSMARTtrain
Parent: WindowServer [57]
Version: V3.0.6 (3.0.6b7)
PID: 258
Thread: Unknown
Link (dyld) error:
Symbol not found: _open$UNIX2003
Referenced from: /Users/marco/Desktop/iSMARTtrain.app/Contents/MacOS/./libSuuntoPropertySDK.dylib
Expected in: /usr/lib/libc.dylib
Model: PowerMac8,2, BootROM 5.2.5f1, 1 processors, PowerPC G5 (3.0), 1.8 GHz, 512 MB
Graphics: ATI Radeon 9600, ATY,RV351, AGP, 128 MB
Memory Module: DIMM0/J4000, 512 MB, DDR SDRAM, PC3200U-30330
AirPort: AirPort Extreme, 405.1 (3.90.34.0.p18)
Modem: Jump, V.92, Version 1.0
Bluetooth: Version 1.9.5f4, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST3160023AS, 149.05 GB
Parallel ATA Device: MATSHITACD-RW CW-8124
USB Device: EyeTV DTT, Elgato, Up to 480 Mb/sec, 500 mA
USB Device: Suunto Sports Instrument, Suunto, Up to 12 Mb/sec, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., Up to 12 Mb/sec, 500 mA
USB Device: USB Receiver, Logitech, Up to 1.5 Mb/sec, 500 mA
Thanks in advance.
Marco
Could you help me? I connect the T6 on my mac. Then I choose the T6. When I try to download the datas, the programme is crashing.

Then I get the following message.
Date/Time: 2009-09-14 19:41:44.934 +0200
OS Version: 10.4.11 (Build 8S165)
Report Version: 4
Command: iSMARTtrain
Path: /Users/marco/Desktop/iSMARTtrain.app/Contents/MacOS/iSMARTtrain
Parent: WindowServer [57]
Version: V3.0.6 (3.0.6b7)
PID: 258
Thread: Unknown
Link (dyld) error:
Symbol not found: _open$UNIX2003
Referenced from: /Users/marco/Desktop/iSMARTtrain.app/Contents/MacOS/./libSuuntoPropertySDK.dylib
Expected in: /usr/lib/libc.dylib
Model: PowerMac8,2, BootROM 5.2.5f1, 1 processors, PowerPC G5 (3.0), 1.8 GHz, 512 MB
Graphics: ATI Radeon 9600, ATY,RV351, AGP, 128 MB
Memory Module: DIMM0/J4000, 512 MB, DDR SDRAM, PC3200U-30330
AirPort: AirPort Extreme, 405.1 (3.90.34.0.p18)
Modem: Jump, V.92, Version 1.0
Bluetooth: Version 1.9.5f4, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST3160023AS, 149.05 GB
Parallel ATA Device: MATSHITACD-RW CW-8124
USB Device: EyeTV DTT, Elgato, Up to 480 Mb/sec, 500 mA
USB Device: Suunto Sports Instrument, Suunto, Up to 12 Mb/sec, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., Up to 12 Mb/sec, 500 mA
USB Device: USB Receiver, Logitech, Up to 1.5 Mb/sec, 500 mA
Thanks in advance.
Marco
Re: iSMARTtrain V3.0.6 Beta 7 Release
Great to see progress!
Now, laps are shown, but they are still without time (only zeros) - guess times will follow in a not too distant release. Otherwise, works very fine!
Now, laps are shown, but they are still without time (only zeros) - guess times will follow in a not too distant release. Otherwise, works very fine!
Re: iSMARTtrain V3.0.6 Beta 7 Release
mawle23 wrote:Hey Stuart,
Could you help me? I connect the T6 on my mac. Then I choose the T6. When I try to download the datas, the programme is crashing.![]()
Then I get the following message.
Date/Time: 2009-09-14 19:41:44.934 +0200
OS Version: 10.4.11 (Build 8S165)
Report Version: 4
Thanks in advance.
Marco
Hi,
I suspect that the library we're using is 10.5 or above, given the error you've got. I'll see if I can find some 10.4 discs here to test it. If it IS the case, then we'll probably only support Suunto on 10.5 or 10.6
Thanks & Regards
Stuart
OTAG Technologies Ltd
Re: iSMARTtrain V3.0.6 Beta 7 Release
Hi Stuart,
Downloads work for me using T4C.
I realise this is work in progress, but thought my findings my be useful:
Only data for duration & av/Mx heart rate have been downloaded i.e. no distance or continual heart rate etc etc
When I check the history data in the watch or download to STM, the data is all there.
Is this available yet? Also, if it helps, Im using a footpod.
Finally, I noticed that the download only works with the PC Pod plugged directly into a port on the back of my iMac. Although when plugged into the keyboard or USB hub, the pod appears in the port dialogue box & T4C as a device, when I hit continue after the watch is in 'PC Transfer' an error is returned ' Cannot connect to Suunto device'
Many thanks
Paul
Many thanks
Paul
Downloads work for me using T4C.
I realise this is work in progress, but thought my findings my be useful:
Only data for duration & av/Mx heart rate have been downloaded i.e. no distance or continual heart rate etc etc
When I check the history data in the watch or download to STM, the data is all there.
Is this available yet? Also, if it helps, Im using a footpod.
Finally, I noticed that the download only works with the PC Pod plugged directly into a port on the back of my iMac. Although when plugged into the keyboard or USB hub, the pod appears in the port dialogue box & T4C as a device, when I hit continue after the watch is in 'PC Transfer' an error is returned ' Cannot connect to Suunto device'
Many thanks
Paul
Many thanks
Paul
Re: iSMARTtrain V3.0.6 Beta 7 Release
Paul R wrote:Hi Stuart,
Downloads work for me using T4C.
Glad it's finally working!
Paul R wrote:I realise this is work in progress, but thought my findings my be useful:
Only data for duration & av/Mx heart rate have been downloaded i.e. no distance or continual heart rate etc etc
The T3 & T4 models don't store continuous data, only a summary of the duration, distance, time in zones, etc.
Paul R wrote:Finally, I noticed that the download only works with the PC Pod plugged directly into a port on the back of my iMac. Although when plugged into the keyboard or USB hub, the pod appears in the port dialogue box & T4C as a device, when I hit continue after the watch is in 'PC Transfer' an error is returned ' Cannot connect to Suunto device'
Yes, I've noticed this as well with my Mac Mini - I wondered if it was just me! I'll put a note on our blog about it.
Thanks & Regards
Stuart
Re: iSMARTtrain V3.0.6 Beta 7 Release
Paul R wrote:I realise this is work in progress, but thought my findings my be useful:
Only data for duration & av/Mx heart rate have been downloaded i.e. no distance or continual heart rate etc etc
The T3 & T4 models don't store continuous data, only a summary of the duration, distance, time in zones, etc.
Thanks & Regards
Stuart[/quote]
Hi Stuart,
Thanks for the prompt response.
As far as the above is concerned, (you put it in words much better than I). I am not getting the distance or time in zone info, or at least I cannot see this in the graphs or summary.
Thanks again
Paul