Lion compatibility?

Discussions about the current release of iSMARTtrain
Frank Bowman
Posts: 45
Joined: Thu Jul 24, 2008 4:26 pm

Lion compatibility?

Post by Frank Bowman » Fri Jul 22, 2011 3:29 am

Hello Stuart.

Is IST Lion compatible? It's listed as a PowerPC program.

Thanks.

Stuart
Site Admin
Posts: 441
Joined: Sun Jul 13, 2008 12:15 pm

Re: Lion compatibility?

Post by Stuart » Sat Jul 23, 2011 8:42 pm

Hi Frank,
It's a universal binary (i.e. PPC and Intel wrapped in one app).

As far as I'm aware it functions ok under Lion - I've been running Lion for a few months and haven't had any problems.

Regards

Stuart

Brady
Posts: 3
Joined: Tue Jul 26, 2011 9:56 pm

Re: Lion compatibility?

Post by Brady » Tue Jul 26, 2011 10:00 pm

After upgrading to Lion, I tried to download data from my Polar S410 HRM via Sonic Link and received the following message: "You can't open the application qt_export because PowerPC applications are no longer supported."
Any advice on getting it working again would be appreciated.

Stuart
Site Admin
Posts: 441
Joined: Sun Jul 13, 2008 12:15 pm

Re: Lion compatibility?

Post by Stuart » Thu Jul 28, 2011 12:59 pm

Brady wrote:After upgrading to Lion, I tried to download data from my Polar S410 HRM via Sonic Link and received the following message: "You can't open the application qt_export because PowerPC applications are no longer supported."
Any advice on getting it working again would be appreciated.


See http://www.ismarttrain.com/downloads.php

Regards

Stuart

Brady
Posts: 3
Joined: Tue Jul 26, 2011 9:56 pm

Re: Lion compatibility?

Post by Brady » Sat Jul 30, 2011 10:32 am

Got the download. It has solved the Power PC issue, but I can't get the Sonic Link to work. It worked normally with the previous version, but now fails on every attempt. When trying to adjust the settings, the application hangs and the only way to get download working normally again is to re-install the application.
I'm beginning to regret installing Lion. Any suggestions?
Polar S410 with Sonic Link.

Frank Bowman
Posts: 45
Joined: Thu Jul 24, 2008 4:26 pm

Re: Lion compatibility?

Post by Frank Bowman » Sun Jul 31, 2011 9:52 pm

Same here. The Lion version of IST installed first time but is not recognising my Keyspan USB/IR port.

Stuart
Site Admin
Posts: 441
Joined: Sun Jul 13, 2008 12:15 pm

Re: Lion compatibility?

Post by Stuart » Tue Aug 09, 2011 10:26 am

Frank Bowman wrote:Same here. The Lion version of IST installed first time but is not recognising my Keyspan USB/IR port.


You'll need 64-bit drivers for the Keyspan USB-Serial device - Lion is a 64-bit operating system. You should find them on the keyspan website.

Regards

Stuart

Frank Bowman
Posts: 45
Joined: Thu Jul 24, 2008 4:26 pm

Re: Lion compatibility?

Post by Frank Bowman » Tue Aug 09, 2011 10:38 am

Hello Stuart.

Now appears to be a legacy product with no further updates. I've baled out and now run an Edge 800 & FR60.

Frank.

Brady
Posts: 3
Joined: Tue Jul 26, 2011 9:56 pm

Re: Lion compatibility?

Post by Brady » Wed Aug 10, 2011 8:01 am

Any suggestions for the Sonic Link problem?

mikeonbikesd
Posts: 1
Joined: Sun Aug 21, 2011 8:42 pm

Re: Lion compatibility?

Post by mikeonbikesd » Sun Aug 21, 2011 8:59 pm

After upgrading to Lion, I tried to download data from my Polar CS200 HRM via Sonic Link and received the following message: "You can't open the application qt_export because PowerPC applications are no longer supported."

Got the download you posted. It has solved the Power PC issue, but I can't get the Sonic Link to work. It worked normally with the previous version, but now fails on every attempt. Any suggestions?
Polar CS200 with Sonic Link.

Post Reply